TTECH - Cung cấp các loại máy đo độ nhám bề mặt của các hãng nổi tiếng trên thế giới với chất lượng và giá cả cạnh tranh nhất.
Quý khách hàng quan tâm vui lòng liên hệ trực tiếp để được tư vấn và yêu cầu báo giá: 04 3750 5142
ABSOLUTE MOBILITY WITH POCKET SURF PS1
Máy Đo Độ Nhám Bề Mặt
With increasing manufacturing and machine quality, the surface finish technical products is becoming ever more important than ever.
This makes it all the more crucial to offer metrological solutions with instrument designs that provide quick and simple yet standards-compliant measuring options.
In some cases measurements are transferred from the inspection room to production to save time and money. Components may be too large or heavy to be transported, leaving no alternative but to carry out measurements directly on the component or machine.
The Pocket Surf PS1 lives up to its claim of " Absolute mobility " in all manner of ways, providing:
● Battery powered freedom
Over 500 measurements without having to recharge the instrument.
● An all-in-one solution that is no larger than a digital camera.
Small and lightweight (400g / 0.88 lbs.).
● Instrument flexibility
The standard range of functions is sufficient for this all-purpose smart little instrument to perform your
Measuring tasks.
● All the measuring positions you need
Can be used horizontally, vertically, upside down or in any other position required by the component.
● 24 parameters
Offer the same range of functions as a laboratory instrument.
● Error-free operation thanks to an integrated roughness standard.
● Automatic cutoff selection (Patented) so that even non-specialists are ensured correct measuring results.
● Simple operation
May do do nham be mat kim loai
The pocket surf shows how simple the PS1 is to use. You quickly get to grips with the essential features, enabling you to complete your measuring tasks with excellent results.
Pocket Surf PS1. Technical Data
| Unit of measurement | Metric, inch |
| Measuring principle | Stylus method |
| Pick-up | Inductive skidded prick-up, 5µm (200µin) stylus tip, measuring force approx. 0.7 mN |
| Parameters | Ra, Rq, Rz equiv. To Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1 |
| (24, with tolerance limits) | A2, Vo, Rt, R3z, RPc, Rmr equiv. To tp (JIS, ASME,), RSm, R, Ar, Rx |
| Languages | 14 including 3 Asian languages |
| Measuring Range | 350µm, 180µm, 90µm (changes automatically) |
| Profile resolution | 32nm, 16nm, 8nm (changes automatically) |
| Filter | Phase-correct profile filter (Gaussian filter) acc. To DIN EN ISO 11562, special filter acc. To DIN EN ISO 13565-1, Is filter acc. To DIN EN ISO 3274 (can be disabled) |
| Cutoff lc* | 0.25mm, 0.8mm, 2.5mm; automatic (0.010in, 0.030in, 0.100in) |
| Traversing length Lt* | 1.75mm, 5.6mm, 17.5mm; automatic (0.069in, 0.22in, 0.69in) |
| Traversing length (acc. To MOTIF) | 1mm, 2mm, 4mm, 8mm, 12mm, 16mm, (0.040in, 0.080in, 0.160in, 0.320in, 0.480in, 0.640in) |
| Short cutoff* | Selectable |
| Evaluation length In* | 1.25mm, 4.0mm, 12.50mm (0.050in, 0.15in, 0.50in) |
| Number n of sampling lengths* | Selectable: 1 to 5 |
| Calibration function | Dynamic |
| Memory capacity | Max. 15 profiles, max. 20,000 results |
